ProTeam — ProTeam – Metal Magic
Effectively removes problems on pool surfaces from staining caused by metals; easily removes suspended metal particles from pool water.
- ManufacturerProTeam
Features
- Crystalizes metals and removes stains caused by metals in pool water
- Can help to remove and prevents scale buildup
- Removes metals such as iron, copper, silver and manganese
- Compatible with all filtration types
- Compatible with all sanitizers
- Safe for use with any type of pool equipment
Benefits
- Prevents staining and scaling
- Protects plumbing and equipment
- Can be used to solve existing water issues or prevent bad water from causing issues
- Using the normal application rate, pool use can resume after an hour.
Applications
- Best results occur when water temperature is above 60 degrees F
- Adjust pH to 7.5 (or higher) and clean filter as necessary.
- Reduce chlorine to 1 ppm prior to application and for 1 week after application
- Turn off chlorine generator. Disconnect, bypass, or remove Nature 2, Frog, and similar system.
- For light staining or low metal content in water, use 1 quart per 10,000 gallons of pool water.
- For other treatment options refer to the ProTeam Metal Magic Sponge Test .pdf (below)
- After application, keep filter running continuously for 48 hours. Avoid superchlorinating for 1 week after treatment
- Pool water with high calcium levels, TDS, or a positive saturation index may cloud with use, which will clear with normal filtration. ProTeam Dry Clarifier or EXO Clarifier will speed the recovery.
