- ManufacturerCarvin - Jacuzzi
INCLUDED
Cover Handles (Black)
Item N° : 16100100R2
2’’ Black Unions PVC
Item N° : 31150109R2-BLK
FEATURES
Exclusive Ring-Lok Opening System
Allows a tool-free access to strainer and pump internals.
Exclusive One Way Flap
Prevents debris in the pump strainer, skimmer basket and fi lter from fl owing back into pool. The fl ap also prevents residual hot water in the heater from fl owing into fi lter and causing damage to grids, valves, gaskets, etc.
Exclusive Air Purge System
An exclusive air purge system within the strainer expels air outside the pump for superior priming capabilities.
Excllusive Run Dry
Patented air-cooled heat sink allows pump to run dry without damage to shaft seal.
Energy Efficient Variable Speed
Variable speed pump is intended to run on lower speeds to maintain a sanitary environment which, in turn, minimizes energy consumption.
One-Piece Case
Eliminates leaks and ensures quiet operation.
208 in3 (3411 cm3) Heavy-Duty Strainer Basket
The internal ribs in the large strainer basket assure fl ow, even when fi lled with leaves and debris.
DOE compliant
All Magnum Force V pumps have complied with DOE regulations.
TECHNICAL SPECIFICATIONS
PERFORMANCE
DIMENSIONS
Magnum Force V Replacement
FIG. NO. | DESCRIPTION | PART NO. |
---|---|---|
1 | Strainer RingLokTM | 42282806R |
2 | Strainer Cover | 39257902R |
3 | Strainer O-Ring 5-5/8 x 6-1/8 x 1/4" - units after 7 / 89 | 47035803R |
4 | Strainer Basket With Flapper For Magnum Plus | 16109704R |
4 | Strainer Basket (9" Tall) With Flapper For Magnum Force (Prior to 02/01/03) Strainer Basket (12" Tall) With Flapper For Magnum Force (Prior to 02/01/03) | 16108606R |
4 | Strainer Basket (9" Tall) With Flapper For Magnum Force (Prior to 02/01/03) Strainer Basket (12" Tall) With Flapper For Magnum Force (Prior to 02/01/03) | 16113409R |
4 | Strainer Basket (9" Tall) No Flapper, No Tabs | 16109506R |
4A | Flapper | 16113510R |
5 | Magnum Plus Body | 03085602R |
5A | Magnum Force Body With Plugs And Basket (After 02/01/03) | 03090602R |
5B | Magnum Force 3 Body With Plugs And Basket (After 02/01/03) | 03090701R |
6 | Strainer Basket Air Bleed Tube | 31174600R |
7 | Drain Plug With O-Ring (2/bag) | 31160906R2 |
7 | Drain Plug With O-Ring (50/bag) | 31160906R50 |
8 | Base Motor Support Assembly For Magnum Plus | 12261380R |
9 | Dowel Pin 1/4 x 1-1/4" SS For Magnum Plus | 14038328R |
10 | Pump Base For Magnum Force Motor Support For Magnum Force | 12112603R |
11 | Square Ring Gasket | 47023254R |
12 | Hex Washer Head Screw #8 x 1-1/4" SS (2 or 3 req.) (3/bag) | 14420608R |
13 | Diffuser | 06001002R |
14 | Seal Ring 1/2 - 3 HP | 10146207R |
14 | Seal Ring 4 and 5 HP | 10146314R |
15 | Impeller for 16VMF-S2 | 05038203R |
15 | Impeller for 27VMF-S2 | 05038401R |
16 | Shaft Seal | 10139020R |
17 | O-Ring 6-3/4 x 7-1/8" | 47036447R |
18 | Seal Housings for Variable Speed Magnum Force | 02139202 |
19 | PL Hex Capscrew 3/8" - 16 x 7/8" (4/bag) | 14129324R |
20 | Motor Housing Bracket | 02136802R |
21 | Pump RinkLogTM With Rachet | 42288605R |
22 | Mounting RinkLogTM Rachet | 42286708R |
23 | 1.6 hp Variable Speed Motor - 60HZ 208/230V | 90810866R |
23 | 2.7 hp Variable Speed Motor - 60HZ 230V | 90810677R |
24 | 2 UN Half Kit (incl. 2 ea.) | 31150109R2 |
25 | Case, Base, Basket Assembly For Magnum Force #1, 2, 3, 4, 4A, 5, 6, 7, 8, 8A | 42234506K |